I’ve published simple php script for managing email accounts to the Github.
https://github.com/habibzadeh/php-mailadmin
We’re going to setup a secure mail server with Postfix, Dovecot, and MySQL on Debian or Ubuntu. Specifically, create new user mailboxes and send or receive email for configured domains.
Prerequisites
- Debian based system with stable and fast internet connection.
- Ensure that the iptables firewall is not blocking any of the standard mail ports (25, 465, 587, 110, 995, 143, and 993). If using a different form of firewall, confirm that it is not blocking any of the needed ports either.
- Setup DNS and MX records for your domains, you need to ensure your domains MX records pointed to your email server public IP address.
Installing an SSL Certificate
Dovecot offers a default self-signed certificate for free. This certificate encrypts the mail connections similar to a purchased certificate. However, the email users receive warnings about the certificate when they attempt to set up their email accounts. Optionally, purchase and configure a commercial SSL certificate to avoid the warnings.
As of version 2.2.13-7, Dovecot no longer provides a default SSL certificate. This affects Debian 8 users, and means that if you wish to use SSL encryption (reccomended), you must generate your own self-signed certificate or use a trusted certificate from a Certificate Authority.
Many email service providers such as Gmail will only accept commercial SSL certificates for secure IMAP/POP3 connections.
Installing Packages
- Log in as the root user:
su - Install the required packages:
apt-get install postfix postfix-mysql dovecot-core dovecot-imapd dovecot-pop3d dovecot-lmtpd dovecot-mysql mysql-server
Follow the prompt to type in a secure MySQL password and to select the type of mail server you wish to configure. Select Internet Site. The System Mail Name should be the FQDN.
MySQL Database Setup
- Create a new database:
mysqladmin -p create mailserver - Enter the MySQL root password.
- Log in to MySQL:
mysql -p mailserver - Create the MySQL user and grant the new user permissions over the database. Replace
mailuserpasswith a secure password:GRANT SELECT ON mailserver.* TO 'mailuser'@'127.0.0.1' IDENTIFIED BY 'mailuserpass'; - Flush the MySQL privileges to apply the change:
FLUSH PRIVILEGES; - Create a table for the domains:
CREATE TABLE `virtual_domains` ( `id` int(11) NOT NULL auto_increment, `name` varchar(50) NOT NULL, PRIMARY KEY (`id`) ) ENGINE=InnoDB DEFAULT CHARSET=utf8; - Create a table for all of the email addresses and passwords:
CREATE TABLE `virtual_users` ( `id` int(11) NOT NULL auto_increment, `domain_id` int(11) NOT NULL, `password` varchar(106) NOT NULL, `email` varchar(100) NOT NULL, PRIMARY KEY (`id`), UNIQUE KEY `email` (`email`), FOREIGN KEY (domain_id) REFERENCES virtual_domains(id) ON DELETE CASCADE ) ENGINE=InnoDB DEFAULT CHARSET=utf8; - Create a table for the email aliases:
CREATE TABLE `virtual_aliases` ( `id` int(11) NOT NULL auto_increment, `domain_id` int(11) NOT NULL, `source` varchar(100) NOT NULL, `destination` varchar(100) NOT NULL, PRIMARY KEY (`id`), FOREIGN KEY (domain_id) REFERENCES virtual_domains(id) ON DELETE CASCADE ) ENGINE=InnoDB DEFAULT CHARSET=utf8;
Adding Data
Now that the database and tables have been created, add some data to MySQL.
- Add the domains to the
virtual_domainstable. Replace the values for example.com and hostname with your own settings.INSERT INTO `mailserver`.`virtual_domains` (`id` ,`name`) VALUES ('1', 'example.com'), ('2', 'hostname.example.com'), ('3', 'hostname'), ('4', 'localhost.example.com');Note which id goes with which domain, the id is necessary for the next two steps.
- Add email addresses to the
virtual_userstable. Replace the email address values with the addresses that you wish to configure on the mailserver. Replace thepasswordvalues with strong passwords.INSERT INTO `mailserver`.`virtual_users` (`id`, `domain_id`, `password` , `email`) VALUES ('1', '1', ENCRYPT('password', CONCAT('$6$', SUBSTRING(SHA(RAND()), -16))), '[email protected]'), ('2', '1', ENCRYPT('password', CONCAT('$6$', SUBSTRING(SHA(RAND()), -16))), '[email protected]'); - To set up an email alias, add it to the
virtual_aliasestable.INSERT INTO `mailserver`.`virtual_aliases` (`id`, `domain_id`, `source`, `destination`) VALUES ('1', '1', '[email protected]', '[email protected]');
That’s it! Now you’re ready to verify that the data was successfully added to MySQL.
Testing
Since all of the information has been entered into MySQL, check that the data is there.
- Check the contents of the
virtual_domainstable:SELECT * FROM mailserver.virtual_domains; - Verify that you see the following output:
+----+-----------------------+ | id | name | +----+-----------------------+ | 1 | example.com | | 2 | hostname.example.com | | 3 | hostname | | 4 | localhost.example.com | +----+-----------------------+ 4 rows in set (0.00 sec) - Check the
virtual_userstable:SELECT * FROM mailserver.virtual_users; - Verify the following output, the hashed passwords are longer than they appear below:
+----+-----------+-------------------------------------+--------------------+ | id | domain_id | password | email | +----+-----------+-------------------------------------+--------------------+ | 1 | 1 | $6$574ef443973a5529c20616ab7c6828f7 | [email protected] | | 2 | 1 | $6$030fa94bcfc6554023a9aad90a8c9ca1 | [email protected] | +----+-----------+-------------------------------------+--------------------+ 2 rows in set (0.01 sec) - Check the
virtual_userstable:SELECT * FROM mailserver.virtual_aliases; - Verify the following output:
+----+-----------+-------------------+--------------------+ | id | domain_id | source | destination | +----+-----------+-------------------+--------------------+ | 1 | 1 | [email protected] | [email protected] | +----+-----------+-------------------+--------------------+ 1 row in set (0.00 sec) - If everything outputs correctly, you’re done with MySQL! Exit MySQL:
exit
Postfix
Next, set up Postfix so the server can accept incoming messages for the domains.
- Immediately make a copy of the default Postfix configuration file in case you need to revert to the default configuration:
cp /etc/postfix/main.cf /etc/postfix/main.cf.orig - Edit the
/etc/postfix/main.cffile to match the following. Ensure that occurrences ofexample.comare replaced with the domain name. Also, replacehostnamewith the system’s hostname on line 44.File :
/etc/postfix/main.cf# See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters #smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem #smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key #smtpd_use_tls=yes #smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache #smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_tls_cert_file=/etc/dovecot/dovecot.pem smtpd_tls_key_file=/etc/dovecot/private/dovecot.pem smtpd_use_tls=yes smtpd_tls_auth_only = yes #Enabling SMTP for authenticated users, and handing off authentication to Dovecot smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth smtpd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = hostname.example.com alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname #mydestination = example.com, hostname.example.com, localhost.example.com, localhost mydestination = localhost relayhost = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all #Handing off local delivery to Dovecot's LMTP, and telling it where to store mail virtual_transport = lmtp:unix:private/dovecot-lmtp #Virtual domains, users, and aliases virtual_mailbox_domains = mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf virtual_alias_maps = mysql:/etc/postfix/mysql-virtual-alias-maps.cf, mysql:/etc/postfix/mysql-virtual-email2email.cf - Create the file for virtual domains. Ensure that you change the password for the
mailuseraccount. If you used a different user, database name, or table name, customize those settings as well.File :
/etc/postfix/mysql-virtual-mailbox-domains.cfuser = mailuser password = mailuserpass hosts = 127.0.0.1 dbname = mailserver query = SELECT 1 FROM virtual_domains WHERE name='%s' - Create the
/etc/postfix/mysql-virtual-mailbox-maps.cffile, and enter the following values. Make sure you use the mailuser’s password and make any other changes as needed.File :
/etc/postfix/mysql-virtual-alias-maps.cfuser = mailuser password = mailuserpass hosts = 127.0.0.1 dbname = mailserver query = SELECT destination FROM virtual_aliases WHERE source='%s' - Create the
/etc/postfix/mysql-virtual-email2email.cffile and enter the following values. Again, make sure you use the mailuser’s password, and make any other changes as necessary.File :
/etc/postfix/mysql-virtual-email2email.cfuser = mailuser password = mailuserpass hosts = 127.0.0.1 dbname = mailserver query = SELECT email FROM virtual_users WHERE email='%s' - Save the changes you’ve made to the
/etc/postfix/mysql-virtual-email2email.cffile, and restart Postfix:service postfix restart - Enter the following command to ensure that Postfix can find the first domain. Be sure to replace
example.comwith the first virtual domain. The command should return 1 if it is successful.postmap -q example.com mysql:/etc/postfix/mysql-virtual-mailbox-domains.cf - Test Postfix to verify that it can find the first email address in the MySQL table. Enter the following command, replacing
[email protected]with the first email address in the MySQL table. You should again receive 1 as the output:postmap -q [email protected] mysql:/etc/postfix/mysql-virtual-mailbox-maps.cf - Test Postfix to verify that it can find the aliases by entering the following command. Be sure to replace
[email protected]with the actual alias you entered:postmap -q [email protected] mysql:/etc/postfix/mysql-virtual-alias-maps.cfThis should return the email address to which the alias forwards, which is [email protected] in this example.
- Make a copy of the
/etc/postfix/master.cffile:cp /etc/postfix/master.cf /etc/postfix/master.cf.orig - Open the configuration file for editing and uncomment the two lines starting with
submissionandsmtpsand the block of lines starting with-oafter each. The first section of the/etc/postfix/master.cffile should resemble the following:File :
/etc/postfix/master.cf# Postfix master process configuration file. For details on the format # of the file, see the master(5) manual page (command: "man 5 master"). # # Do not forget to execute "postfix reload" after editing this file. # # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #smtp inet n - - - 1 postscreen #smtpd pass - - - - - smtpd #dnsblog unix - - - - 0 dnsblog #tlsproxy unix - - - - 0 tlsproxy submission inet n - - - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o milter_macro_daemon_name=ORIGINATING smtps inet n - - - - smtpd -o syslog_name=postfix/smtps -o smtpd_tls_wrappermode=yes -o smtpd_sasl_auth_enable=yes -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o milter_macro_daemon_name=ORIGINATING - Restart Postfix by entering the following command:
service postfix restart
Congratulations! You have successfully configured Postfix.
Dovecot
Dovecot allows users to log in and check their email using POP3 and IMAP. In this section, configure Dovecot to force users to use SSL when they connect so that their passwords are never sent to the server in plain text.
- Copy all of the configuration files so that you can easily revert back to them if needed:
cp /etc/dovecot/dovecot.conf /etc/dovecot/dovecot.conf.orig cp /etc/dovecot/conf.d/10-mail.conf /etc/dovecot/conf.d/10-mail.conf.orig cp /etc/dovecot/conf.d/10-auth.conf /etc/dovecot/conf.d/10-auth.conf.orig cp /etc/dovecot/dovecot-sql.conf.ext /etc/dovecot/dovecot-sql.conf.ext.orig cp /etc/dovecot/conf.d/10-master.conf /etc/dovecot/conf.d/10-master.conf.orig cp /etc/dovecot/conf.d/10-ssl.conf /etc/dovecot/conf.d/10-ssl.conf.orig - Open the main configuration file and edit the contents to match the following:
File :
/etc/dovecot/dovecot.conf## Dovecot configuration file # If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration # "doveconf -n" command gives a clean output of the changed settings. Use it # instead of copy&pasting files when posting to the Dovecot mailing list. # '#' character and everything after it is treated as comments. Extra spaces # and tabs are ignored. If you want to use either of these explicitly, put the # value inside quotes, eg.: key = "# char and trailing whitespace " # Default values are shown for each setting, it's not required to uncomment # those. These are exceptions to this though: No sections (e.g. namespace {}) # or plugin settings are added by default, they're listed only as examples. # Paths are also just examples with the real defaults being based on configure # options. The paths listed here are for configure --prefix=/usr # --sysconfdir=/etc --localstatedir=/var # Enable installed protocols !include_try /usr/share/dovecot/protocols.d/*.protocol protocols = imap pop3 lmtp # A comma separated list of IPs or hosts where to listen in for connections. # "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces. # If you want to specify non-default ports or anything more complex, # edit conf.d/master.conf. #listen = *, :: # Base directory where to store runtime data. #base_dir = /var/run/dovecot/ # Name of this instance. Used to prefix all Dovecot processes in ps output. #instance_name = dovecot # Greeting message for clients. #login_greeting = Dovecot ready. # Space separated list of trusted network ranges. Connections from these # IPs are allowed to override their IP addresses and ports (for logging and # for authentication checks). disable_plaintext_auth is also ignored for # these networks. Typically you'd specify the IMAP proxy servers here. #login_trusted_networks = # Sepace separated list of login access check sockets (e.g. tcpwrap) #login_access_sockets = # Show more verbose process titles (in ps). Currently shows user name and # IP address. Useful for seeing who are actually using the IMAP processes # (eg. shared mailboxes or if same uid is used for multiple accounts). #verbose_proctitle = no # Should all processes be killed when Dovecot master process shuts down. # Setting this to "no" means that Dovecot can be upgraded without # forcing existing client connections to close (although that could also be # a problem if the upgrade is e.g. because of a security fix). #shutdown_clients = yes # If non-zero, run mail commands via this many connections to doveadm server, # instead of running them directly in the same process. #doveadm_worker_count = 0 # UNIX socket or host:port used for connecting to doveadm server #doveadm_socket_path = doveadm-server # Space separated list of environment variables that are preserved on Dovecot # startup and passed down to all of its child processes. You can also give # key=value pairs to always set specific settings. #import_environment = TZ ## ## Dictionary server settings ## # Dictionary can be used to store key=value lists. This is used by several # plugins. The dictionary can be accessed either directly or though a # dictionary server. The following dict block maps dictionary names to URIs # when the server is used. These can then be referenced using URIs in format # "proxy::<name>". dict { #quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext } # Most of the actual configuration gets included below. The filenames are # first sorted by their ASCII value and parsed in that order. The 00-prefixes # in filenames are intended to make it easier to understand the ordering. !include conf.d/*.conf # A config file can also tried to be included without giving an error if # it's not found: !include_try local.conf - Save the changes to the
/etc/dovecot/dovecot.conffile. - Open the
/etc/dovecot/conf.d/10-mail.conffile. This file controls how Dovecot interacts with the server’s file system to store and retrieve messages.Modify the following variables within the configuration file.
File :
/etc/dovecot/conf.d/10-mail.confmail_location = maildir:/var/mail/vhosts/%d/%n ... mail_privileged_group = mailSave the changes.
- Enter the following command to verify the permissions for
/var/mail:ls -ld /var/mail - Verify that the permissions for
/var/mailare as follows:drwxrwsr-x 2 root mail 4096 Mar 6 15:08 /var/mail - Create the /var/mail/vhosts/ folder and the folder for the domain:
mkdir -p /var/mail/vhosts/example.com - Create the vmail user with a user and group id of 5000 by entering the following commands, one by one. This user will be in charge of reading mail from the server.
groupadd -g 5000 vmail useradd -g vmail -u 5000 vmail -d /var/mail - Change the owner of the
/var/mail/folder and its contents to belong to vmail:chown -R vmail:vmail /var/mail - Open the user authentication file, located in
/etc/dovecot/conf.d/10-auth.confand disable plain-text authentication by uncommenting this line:disable_plaintext_auth = yesSet the
auth_mechanismsby modifying the following line:auth_mechanisms = plain loginComment out the system user login line:
#!include auth-system.conf.extEnable MySQL authentication by uncommenting the auth-sql.conf.ext line:
#!include auth-system.conf.ext !include auth-sql.conf.ext #!include auth-ldap.conf.ext #!include auth-passwdfile.conf.ext #!include auth-checkpassword.conf.ext #!include auth-vpopmail.conf.ext #!include auth-static.conf.extSave the changes to the
/etc/dovecot/conf.d/10-auth.conffile.File :
/etc/dovecot/conf.d/10-auth.conf## ## Authentication processes ## # Disable LOGIN command and all other plaintext authentications unless # SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP # matches the local IP (ie. you're connecting from the same computer), the # connection is considered secure and plaintext authentication is allowed. disable_plaintext_auth = yes # Authentication cache size (e.g. 10M). 0 means it's disabled. Note that # bsdauth, PAM and vpopmail require cache_key to be set for caching to be used. #auth_cache_size = 0 # Time to live for cached data. After TTL expires the cached record is no # longer used, *except* if the main database lookup returns internal failure. # We also try to handle password changes automatically: If user's previous # authentication was successful, but this one wasn't, the cache isn't used. # For now this works only with plaintext authentication. #auth_cache_ttl = 1 hour # TTL for negative hits (user not found, password mismatch). # 0 disables caching them completely. #auth_cache_negative_ttl = 1 hour # Space separated list of realms for SASL authentication mechanisms that need # them. You can leave it empty if you don't want to support multiple realms. # Many clients simply use the first one listed here, so keep the default realm # first. #auth_realms = # Default realm/domain to use if none was specified. This is used for both # SASL realms and appending @domain to username in plaintext logins. #auth_default_realm = # List of allowed characters in username. If the user-given username contains # a character not listed in here, the login automatically fails. This is just # an extra check to make sure user can't exploit any potential quote escaping # vulnerabilities with SQL/LDAP databases. If you want to allow all characters, # set this value to empty. #auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ # Username character translations before it's looked up from databases. The # value contains series of from -> to characters. For example "#@/@" means # that '#' and '/' characters are translated to '@'. #auth_username_translation = # Username formatting before it's looked up from databases. You can use # the standard variables here, eg. %Lu would lowercase the username, %n would # drop away the domain if it was given, or "%n-AT-%d" would change the '@' into # "-AT-". This translation is done after auth_username_translation changes. #auth_username_format = # If you want to allow master users to log in by specifying the master # username within the normal username string (ie. not using SASL mechanism's # support for it), you can specify the separator character here. The format # is then <username><separator><master username>. UW-IMAP uses "*" as the # separator, so that could be a good choice. #auth_master_user_separator = # Username to use for users logging in with ANONYMOUS SASL mechanism #auth_anonymous_username = anonymous # Maximum number of dovecot-auth worker processes. They're used to execute # blocking passdb and userdb queries (eg. MySQL and PAM). They're # automatically created and destroyed as needed. #auth_worker_max_count = 30 # Host name to use in GSSAPI principal names. The default is to use the # name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab # entries. #auth_gssapi_hostname = # Kerberos keytab to use for the GSSAPI mechanism. Will use the system # default (usually /etc/krb5.keytab) if not specified. You may need to change # the auth service to run as root to be able to read this file. #auth_krb5_keytab = # Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and # ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt> #auth_use_winbind = no # Path for Samba's ntlm_auth helper binary. #auth_winbind_helper_path = /usr/bin/ntlm_auth # Time to delay before replying to failed authentications. #auth_failure_delay = 2 secs # Require a valid SSL client certificate or the authentication fails. #auth_ssl_require_client_cert = no # Take the username from client's SSL certificate, using # X509_NAME_get_text_by_NID() which returns the subject's DN's # CommonName. #auth_ssl_username_from_cert = no # Space separated list of wanted authentication mechanisms: # plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey # gss-spnego # NOTE: See also disable_plaintext_auth setting. auth_mechanisms = plain login ## ## Password and user databases ## # # Password database is used to verify user's password (and nothing more). # You can have multiple passdbs and userdbs. This is useful if you want to # allow both system users (/etc/passwd) and virtual users to login without # duplicating the system users into virtual database. # # <doc/wiki/PasswordDatabase.txt> # # User database specifies where mails are located and what user/group IDs # own them. For single-UID configuration use "static" userdb. # # <doc/wiki/UserDatabase.txt> #!include auth-deny.conf.ext #!include auth-master.conf.ext #!include auth-system.conf.ext !include auth-sql.conf.ext #!include auth-ldap.conf.ext #!include auth-passwdfile.conf.ext #!include auth-checkpassword.conf.ext #!include auth-vpopmail.conf.ext #!include auth-static.conf.ext - Edit the
/etc/dovecot/conf.d/auth-sql.conf.extfile with the authentication information. Paste the following lines into in the file:passdb { driver = sql args = /etc/dovecot/dovecot-sql.conf.ext } userdb { driver = static args = uid=vmail gid=vmail home=/var/mail/vhosts/%d/%n }Save the changes to the
/etc/dovecot/conf.d/auth-sql.conf.extfile. - Update the
/etc/dovecot/dovecot-sql.conf.extfile with our custom MySQL connection information.Uncomment and set the driver line as shown below:
driver = mysqlUncomment the connect line and set the MySQL connection information. Use the mailuser’s password and any other custom settings:
connect = host=127.0.0.1 dbname=mailserver user=mailuser password=mailuserpassUncomment the
default_pass_schemeline and set it to SHA512-CRYPT:default_pass_scheme = SHA512-CRYPTpassword_query = SELECT email as user, password FROM virtual_users WHERE email='%u';This password query lets you use an email address listed in the
virtual_userstable as the username credential for an email account. If you want to be able to use the alias as the username instead (listed in thevirtual_aliasestable), first add every primary email address to thevirtual_aliasestable (directing to themselves) and then use the following line in/etc/dovecot/dovecot-sql.conf.extinstead:password_query = SELECT email as user, password FROM virtual_users WHERE email=(SELECT destination FROM virtual_aliases WHERE source = '%u');Save the changes to the
/etc/dovecot/dovecot-sql.conf.extfile.File :
/etc/dovecot/dovecot-sql.conf.ext# This file is opened as root, so it should be owned by root and mode 0600. # # http://wiki2.dovecot.org/AuthDatabase/SQL # # For the sql passdb module, you'll need a database with a table that # contains fields for at least the username and password. If you want to # use the user@domain syntax, you might want to have a separate domain # field as well. # # If your users all have the same uig/gid, and have predictable home # directories, you can use the static userdb module to generate the home # dir based on the username and domain. In this case, you won't need fields # for home, uid, or gid in the database. # # If you prefer to use the sql userdb module, you'll want to add fields # for home, uid, and gid. Here is an example table: # # CREATE TABLE users ( # username VARCHAR(128) NOT NULL, # domain VARCHAR(128) NOT NULL, # password VARCHAR(64) NOT NULL, # home VARCHAR(255) NOT NULL, # uid INTEGER NOT NULL, # gid INTEGER NOT NULL, # active CHAR(1) DEFAULT 'Y' NOT NULL # ); # Database driver: mysql, pgsql, sqlite driver = mysql # Database connection string. This is driver-specific setting. # # HA / round-robin load-balancing is supported by giving multiple host # settings, like: host=sql1.host.org host=sql2.host.org # # pgsql: # For available options, see the PostgreSQL documention for the # PQconnectdb function of libpq. # Use maxconns=n (default 5) to change how many connections Dovecot can # create to pgsql. # # mysql: # Basic options emulate PostgreSQL option names: # host, port, user, password, dbname # # But also adds some new settings: # client_flags - See MySQL manual # ssl_ca, ssl_ca_path - Set either one or both to enable SSL # ssl_cert, ssl_key - For sending client-side certificates to server # ssl_cipher - Set minimum allowed cipher security (default: HIGH) # option_file - Read options from the given file instead of # the default my.cnf location # option_group - Read options from the given group (default: client) # # You can connect to UNIX sockets by using host: host=/var/run/mysql.sock # Note that currently you can't use spaces in parameters. # # sqlite: # The path to the database file. # # Examples: # connect = host=192.168.1.1 dbname=users # connect = host=sql.example.com dbname=virtual user=virtual password=blarg # connect = /etc/dovecot/authdb.sqlite # connect = host=127.0.0.1 dbname=mailserver user=mailuser password=mailuserpass # Default password scheme. # # List of supported schemes is in # http://wiki2.dovecot.org/Authentication/PasswordSchemes # default_pass_scheme = SHA512-CRYPT # passdb query to retrieve the password. It can return fields: # password - The user's password. This field must be returned. # user - user@domain from the database. Needed with case-insensitive lookups. # username and domain - An alternative way to represent the "user" field. # # The "user" field is often necessary with case-insensitive lookups to avoid # e.g. "name" and "nAme" logins creating two different mail directories. If # your user and domain names are in separate fields, you can return "username" # and "domain" fields instead of "user". # # The query can also return other fields which have a special meaning, see # http://wiki2.dovecot.org/PasswordDatabase/ExtraFields # # Commonly used available substitutions (see http://wiki2.dovecot.org/Variables # for full list): # %u = entire user@domain # %n = user part of user@domain # %d = domain part of user@domain # # Note that these can be used only as input to SQL query. If the query outputs # any of these substitutions, they're not touched. Otherwise it would be # difficult to have eg. usernames containing '%' characters. # # Example: # password_query = SELECT userid AS user, pw AS password \ # FROM users WHERE userid = '%u' AND active = 'Y' # #password_query = \ # SELECT username, domain, password \ # FROM users WHERE username = '%n' AND domain = '%d' password_query = SELECT email as user, password FROM virtual_users WHERE email='%u'; # userdb query to retrieve the user information. It can return fields: # uid - System UID (overrides mail_uid setting) # gid - System GID (overrides mail_gid setting) # home - Home directory # mail - Mail location (overrides mail_location setting) # # None of these are strictly required. If you use a single UID and GID, and # home or mail directory fits to a template string, you could use userdb static # instead. For a list of all fields that can be returned, see # http://wiki2.dovecot.org/UserDatabase/ExtraFields # # Examples: # user_query = SELECT home, uid, gid FROM users WHERE userid = '%u' # user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%u' # user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%u' # #user_query = \ # SELECT home, uid, gid \ # FROM users WHERE username = '%n' AND domain = '%d' # If you wish to avoid two SQL lookups (passdb + userdb), you can use # userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll # also have to return userdb fields in password_query prefixed with "userdb_" # string. For example: #password_query = \ # SELECT userid AS user, password, \ # home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \ # FROM users WHERE userid = '%u' # Query to get a list of all usernames. #iterate_query = SELECT username AS user FROM users - Change the owner and group of the
/etc/dovecot/directory to vmail and dovecot:chown -R vmail:dovecot /etc/dovecot - Change the permissions on the
/etc/dovecot/directory:chmod -R o-rwx /etc/dovecot - Open the sockets configuration file, located at
/etc/dovecot/conf.d/10-master.conf - Disable unencrypted IMAP and POP3 by setting the protocols’ ports to 0, as shown below. Ensure that the entries for port and ssl below the IMAPS and pop3s entries are uncommented:
service imap-login { inet_listener imap { #port = 0 } inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3 { port = 0 } inet_listener pop3s { port = 995 ssl = yes } }Leave the secure versions unedited, specifically the imaps and pop3s, so that their ports still work. The default settings for imaps and pop3s are fine. Optionally, leave the port lines commented out, as the default ports are the standard 993 and 995.
Find the service lmtp section and use the configuration shown below:
service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { mode = 0600 user = postfix group = postfix } # Create inet listener only if you can't use the above UNIX socket #inet_listener lmtp { # Avoid making LMTP visible for the entire internet #address = #port = #} }Locate the service auth section and configure it as shown below:
service auth { # auth_socket_path points to this userdb socket by default. It's typically # used by dovecot-lda, doveadm, possibly imap process, etc. Its default # permissions make it readable only by root, but you may need to relax these # permissions. Users that have access to this socket are able to get a list # of all usernames and get results of everyone's userdb lookups. unix_listener /var/spool/postfix/private/auth { mode = 0666 user = postfix group = postfix } unix_listener auth-userdb { mode = 0600 user = vmail #group = } # Postfix smtp-auth #unix_listener /var/spool/postfix/private/auth { # mode = 0666 #} # Auth process is run as this user. user = dovecot }In the service auth-worker section, uncomment the user line and set it to vmail as shown below:
service auth-worker { # Auth worker process is run as root by default, so that it can access # /etc/shadow. If this isn't necessary, the user should be changed to # $default_internal_user. user = vmail }Save the changes to the
/etc/dovecot/conf.d/10-master.conffile. - Verify that the default Dovecot SSL certificate and key exist:
ls /etc/dovecot/dovecot.pem ls /etc/dovecot/private/dovecot.pemAs noted above, these files are not provided in Dovecot 2.2.13-7 and above, and will not be present on Debian 8 systems.
If using a different SSL certificate, upload the certificate to the server and make a note of its location and the key’s location. - Open
/etc/dovecot/conf.d/10-ssl.conf - Verify that the ssl_cert setting has the correct path to the certificate, and that the ssl_key setting has the correct path to the key. The default setting displayed uses Dovecot’s built-in certificate, so you can leave this as-is if using the Dovecot certificate. Update the paths accordingly if you are using a different certificate and key.
ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pemForce the clients to use SSL encryption by uncommenting the ssl line and setting it to required:
ssl = requiredSave the changes to the
/etc/dovecot/conf.d/10-ssl.conffile. - Finally, restart Dovecot:
service dovecot restart
You now have a functioning mail server that can securely send and receive email. To setup email account with email client use Port 993 for secure IMAP, Port 995 for secure POP3, and Port 25 with SSL for SMTP.
You can check log file /var/log/mail.log for any errors. At this point, consider adding spam and virus filtering and a webmail client. If DNS records have not been created for the mail server yet, do so now. Once the DNS records have propagated, email will be delivered via the new mail server.
If errors are encountered in the
/var/log/syslogstating “Invalid settings: postmaster_address setting not given”, you may need to append the following line to the/etc/dovecot/dovecot.conffile, replacing domain with the domain name.postmaster_address=postmaster at DOMAIN